Manufacturing Capabilities
Five processes run under a single inspection system. Each page lists the specification, the equipment behind it, and — equally important — the cases where you should use a different process instead.
Our in-house capabilities are 3-, 4- and 5-axis CNC milling, CNC turning with live tooling, sheet metal fabrication including laser cutting and welding, surface finishing through anodising and powder coating, and dimensional inspection on a CMM rated to ±0.002 mm. Heat treatment, forging, casting and non-destructive testing are subcontracted to audited suppliers and remain under our inspection gate.
100% Full-Load Aging Test
Every unit runs full-load high-temperature aging on 10 racks before packing — no sampling. 99%+ pass rate, 0.03% field failure rate.
Specification and equipmentAutomated SMT & Wave Soldering
Three automated LED driver production lines with SMT placement, automatic wave soldering and computerized ICT in-circuit test on every board.
Specification and equipmentIP67 Potting & Sealing
Silicone full-potting and semi-potting encapsulation for LED drivers up to 2000 W, achieving IP67 in all-aluminium housings with integrated cable glands.
Specification and equipmentOEM / ODM Customization
OEM/ODM LED driver customization: custom housings, gift boxes, laser silk-screen marking, terminal options and housing colours on drivers from 7 W to 2000 W.
Specification and equipmentSmart Lighting Integration
Smart LED power supplies with 2.0 MESH networking, compatible with Mi Home, Tmall Genie, Amazon Alexa and Siri. Wiring-free extension and multi-device linkage.
Specification and equipmentTolerance and cost by process
The same feature can often be produced three ways at three different price points. This table shows what each process realistically holds.
| Process | Typical tolerance | Surface finish | Economical quantity | Lead time |
|---|---|---|---|---|
| 3-axis milling | ±0.02 mm | Ra 1.6 µm | 1 – 10,000 | 5–10 days |
| 5-axis milling | ±0.005 mm | Ra 0.4 µm | 10 – 50,000 | 7–15 days |
| CNC turning | ±0.005 mm | Ra 0.4 µm | 50 – 100,000 | 7–12 days |
| Sheet metal | ±0.1 mm | As-formed or coated | 50 – 20,000 | 10–18 days |
| Surface finishing | N/A — adds 5–80 µm | Per specification | Any | 2–6 days |
Surface finishing changes dimensions: coating thickness is added to the part, so bores, threads and press fits must be specified with finish allowance in the drawing. This is decided at DFM, not after machining.
Tell us the wattage, get a quote in 24 hours
Send the series or specification and your target quantity. You will receive a quotation with lead time, warranty terms and the quality summary for the series — no obligation, and no sales call unless you ask for one.